Amazon Basics 46,000 BTU Outdoor Propane Patio Heater with Wheels, Commercial & Residential, Havana Bronze, with Water Tank, 32.1 x 32.1 x 91.3 inches (LxWxH)

Pull everything out of the box. Make sure you get the hardware packet out. Have someone start peeling off the blue protective tape from the 4 pieces that attach together as well as the very top piece b/c this process is tedious and time-consuming. In taking off the blue film, use small motions around the edges to get it going. Get a socket set and screw driver. Then, only attach the four curved metal pieces together, into a big circle, using the outside holes b/c you’ll then attach the very top piece to it using the inside holes. The very top piece goes “bowl” down.Order:1. wheels onto base2. 3 curved rods attach to the base. The curved tops point at each other (facing in). I now put the 20 lb gas tank onto the base.3. lower pipe triangle attaches to the top of the 3 curved rods4. upper pipe attaches to heater unit after feeding gas line down down the upper pipe5. circle, with very top cover (bowl down) now attached, attaches to heater unit with 3 double-threaded screws.6. Take out the 4 existing screws from the top of the lower pipe. You’ll use these again to attach the whole upper part of the heater to the lower half of the heater.7. feed the gas line from the bottom of the upper pipe down through the lower pipe so that it comes out by the gas tank.8. screw it onto a 20 lb. lp tank.9. after opening the tank valve and turning the unit dial a 1/4 turn counter-clockwise and holding it in, push the igniter button. It ignites pretty quickly but you have to keep pushing the dial in for a few more seconds to get a good gas flow.Hope this helps!